This topic has been archived. It cannot be replied.
-
枫下家园 / 电脑用户 / 求助: 计算机无法启动,请大家帮忙我买散件自己攒了一台PC,第一次时启动正常,第二次时正在BIOS中做设置时突然当机,以后再开时,CPU上的风扇动一下就不动了,主板上的灯是亮的,但其它就无任何反应了,不知是怎么回事,请高手帮分析分析.
-ericfzhang(ericfzhang);
2002-5-13
{182}
(#519003@0)
-
把主板拿回店里换一块。
-lmx(流氓兔);
2002-5-13
(#519018@0)
-
能否简单解释一下,谢谢!
-ericfzhang(ericfzhang);
2002-5-13
(#519026@0)
-
风扇电源坏了贝. 用万用表量一量.
-kiss92.5(kiss92);
2002-5-13
(#519028@0)
-
现在机器无法启动,是机箱电源的问题吗? 但主板上的一个LED灯还是亮的
-ericfzhang(ericfzhang);
2002-5-13
(#519036@0)
-
主版都没点了吗? 你不会是把BIOS 的电给放了吧, 那样的话你得找厂家了, 如果你没有给主版充电的工具的话.
-kiss92.5(kiss92);
2002-5-13
(#519037@0)
-
是在BIOS设置中突然死机的,当时没做什么改动. 后来也没做什么操作. 没有给它放电. 谢谢,帮分析一下
-ericfzhang(ericfzhang);
2002-5-13
(#519043@0)
-
显示屏有东西吗? 如果风扇不动不能开太久, 如果什么都不能看到, 有可能是BIOS的电给放了, 只有找厂家了.
-kiss92.5(kiss92);
2002-5-13
(#519056@0)
-
显示屏无显示,可我并没有给BIOS放电啊,另外主板上的灯亮着是否可说主板没烧?
-ericfzhang(ericfzhang);
2002-5-13
(#519074@0)
-
有可能是你自己不小心, 你的是软BIOS吧, 不小心有可能的, 我有朋友也出个这问题, 不知道主版有没有问题, BIOS没电主版的灯也可能亮了, 最好找个懂的人看看, or 去厂家.
-kiss92.5(kiss92);
2002-5-13
(#519081@0)
-
Try给BIOS放电. If not work, then change the power supply
-danpen1(dan);
2002-5-13
(#519093@0)
-
you might just need upgrade your bios, first set lower cpu speed, then upgrade your bios. and put back to right speed.
-winger1234(ben);
2002-5-13
(#519077@0)
-
现在我的机器打开电源后,一点反应也没有!
-ericfzhang(ericfzhang);
2002-5-13
(#519117@0)
-
check your manual and manually set jump to lower speed. give it try. is it asus main baord?
-winger1234(ben);
2002-5-13
(#519126@0)
-
我用的是ASUS CUV266, 在主板上设成JumperFree Mode, 我的CPU是Celeron900, 在BIOS中的System/PCI Frequency 设成100,请指教. 现在无法进BIOS也没法改
-ericfzhang(ericfzhang);
2002-5-13
(#519140@0)
-
it's some kind of waste, anyway you should find a jump, you can diable the jumpfree mode, and try to set to lower speed, set both cpu and meomory to 100, i guess your mother board cann't detect the right speed
-winger1234(ben);
2002-5-13
(#519146@0)
-
you shouldn't set pci to 100.
-winger1234(ben);
2002-5-13
(#519150@0)
-
请告诉我应设成多大
-ericfzhang(ericfzhang);
2002-5-13
(#519155@0)
-
I have set to lower speed, but it still doesn't work.
-ericfzhang(ericfzhang);
2002-5-13
(#519174@0)
-
可能是cpu没有插紧,重新插一下。电源应该没有问题。如果不行,把所有的卡拔下来,重新插一下。99%的可能性是接触问题。和BIOS无关。即使没有电照样可以启动的。
-samcat(轻轻地我将离开你);
2002-5-13
(#519131@0)
-
和BIOS无关!
-samcat(轻轻地我将离开你);
2002-5-13
(#519147@0)
-
我已经按你的建议重插了CPU和MEMORY,拔掉了网卡之类暂时没用的卡,但还是不启动,我测了电源线,在开机时也没有输出电压,是不是电源坏了,请帮忙,谢谢!
-ericfzhang(ericfzhang);
2002-5-13
(#519254@0)
-
开关电源自锁。估计和电容啊什么的有关,换电源吧。
-wooway(wooway);
2002-5-13
(#519261@0)
-
非常感谢各位的帮助,最后发现是电源的问题.
-ericfzhang(ericfzhang);
2002-5-13
(#519552@0)
-
That's ok, match my guess. Bios or Power Supply failure
-danpen1(dan);
2002-5-14
(#519797@0)