This topic has been archived. It cannot be replied.
-
枫下家园 / 家用电器 / 谁知道怎么能打开black decker面包机家里有一个black decker(3磅)的面包机,左边的搅拌桨不怎么转了,想是哪里松了,就想打开看看。但是拧掉了底部所有螺丝后,仍然打不开。哪位朋友有经验指点一下?
-appledriver(七色阳光);
2009-8-30
{153}
(#5516898@0)
-
Give up lah. It screws you up cause you loosed screws。。。
-noproblem(密西洒家。o O);
2009-8-30
(#5517061@0)
-
我的情况是内部的螺丝也要卸。
-secondlasttry(镀锌铁瓦);
2009-8-30
(#5517081@0)
-
什么时候买的?如果保修期没过, 就找厂家吧,他们可以给换一个.
-7755(HappyHealthy);
2009-8-30
(#5517106@0)
-
握手!还以为就俺点背,原来还有个伴儿。俺也卸过螺丝,发现根本打不开。俺的快用一年了,将就着用吧,那个要是也罢工就换/扔。
-pangss(pangss);
2009-8-30
(#5517127@0)
-
全卸开了。不但底部的螺丝要拧下,里面的螺丝也要拧下。发现里面的小塑料轮破了,正在网上找便宜配件。
-appledriver(七色阳光);
2009-8-30
(#5517488@0)
-
修好了卡住轴片的塑料框裂了,自己用钢丝做了个卡子。理论上比厂家设计的还结实:) 这个产品厂家设计的很巧妙,用一段时间后塑料老化或用力过猛塑料轮就容易裂,还不好修,只好扔掉买新的 - 刺激了经济。
修的代价是手指被划了个口子,里面的铁片真不是吃素的。这个厂家应该同时兼产刀具吧
-appledriver(七色阳光);
2009-9-1
{266}
(#5520492@0)
-
这么厉害!我卸的是里面的螺丝,外面的有两个螺丝不是普通的螺丝刀能拧开吧?
-pangss(pangss);
2009-9-3
(#5525373@0)
-
是啊。不过也有办法。我是用尖嘴钳把它们卸下来的。如果以后还想卸,就把它们换成一般螺丝就行了。
-appledriver(七色阳光);
2009-9-3
{72}
(#5525544@0)
-
我用墩头小剪子加钳子把螺丝拧开了。等把底儿上的螺丝都卸完了,想想还有那么多的螺丝等着呢,就有些范懒了。我把这面包机当和面机用,想想工程有点大,就放弃了。;)
-pangss(pangss);
2009-9-3
(#5526961@0)
-
我也主要把它当和面机用 - 做馒头和包子。是有挺多螺丝的,不过修完上好螺丝后,发现它们一个没少,也一个没多,挺有成就感的。
-appledriver(七色阳光);
2009-9-4
(#5528006@0)
-
我不这么认为, 扔掉是真, 买新的就要换个牌子了.
-happyhealthy(健康快乐 );
2009-9-3
(#5525589@0)
-
我的是完全一样的问题。
-secondlasttry(镀锌铁瓦);
2009-9-4
(#5528064@0)