This topic has been archived. It cannot be replied.
-
枫下家园 / 美丽家居 / 有没有懂灯的电路的朋友帮忙看看怎么回事?想在condo的天花板上装个吊灯,接口是预先留好的,四根线:黑、白、绿、橙。我按照灯具里的说明书说的那样,黑的接黑的,白的接白的,地线接到绿的上,没动橙线。接好了装上灯泡,灯亮了,但是开关却不管用。打开开关盒,发现上面下来了5根线:黑、白、绿、橙,红,其中橙线和红线分别连接到开关的一端,另一端出来的是黑线;下面出来的是3根线:黑、白、绿,其中白线和上面的白线是同一根线。这样总共就有了四根黑线,这四根黑线缠在同一个安全帽里。上下的绿线都固定在墙上。
请问我如何走线才能让开关控制灯?
-un007(misshome);
2009-7-24
{479}
(#5440133@0)
-
橙线、红线是3-way开关用的线路,就是说一共有两个1x2开关控制电灯。还应该有另一个开关的。上网查资料吧。
-proton(proton);
2009-7-24
(#5440227@0)
-
吊灯口应该是三线(黑白绿)就够了。既然多了个橙色,说明有第二个电器(例如吊扇)除了你找到的开关,你还应该找到另外两个开关。一个是三路开关的其中一路,另外一个开关就是控制第二个电器(吊扇)的!既然你找到的开关对你的吊灯不起作用,说明你的吊灯接在第二电器上了(吊扇),你找到吊扇的开关,就可以控制吊灯了。因此,白线是直接去到灯口的那根。橙线才应该是三路开关控制的吊灯接头(这个不敢保证,在没有测电装备的情况下,你还是歇歇吧)。
以上言论仅供参考,后果自负!
-mrbigjohn(Lover & Stranger);
2009-7-25
{376}
(#5441957@0)
-
你需要查线:1电源进线 --应该是黑色的线. 2确定出线是否直接到屋顶, 黑色或橙色. 2.换一个SINGLE POLE SWITCH即可. 你现在是一个中心两个基本3-WAY SWITCH 应该还有一开关一同工作.
-baixing2006(laobaixing);
2009-7-25
(#5442529@0)