This topic has been archived. It cannot be replied.
-
枫下家园 / 美丽家居 / 车库门外面的密码按钮跟车库里面的按钮都不能打开车库门了,按了机器会有想打开的声音,但就是打不开,请问是什么毛病?要怎么修理?
-xkfy0521(steven);
2009-7-14
(#5418367@0)
-
没有人知道吗????
-xkfy0521(steven);
2009-7-15
(#5419094@0)
-
看看开门器里面的齿轮是不是卡住了或者坏了
-qwertyasd(东北人);
2009-7-15
(#5419285@0)
-
1. replace battery 9v
2. if inside motor on and chain moving, then chain and door connection loose, there is a manual handle inside of gararge
-diynet(helper);
2009-7-15
(#5419485@0)
-
可能是里面的齿轮坏了,拆下来去买一个新的,在Sears的Service Part可以买到。
-royyu66(roy);
2009-7-15
(#5420341@0)
-
齿轮是不是挂在车库上面正中间的那个机器里面的?
-xkfy0521(steven);
2009-7-15
(#5421604@0)
-
the door is too heavy, the spring for balance does not work. or chain is choked, or hook is off .
-cityaround(求雨山);
2009-7-15
(#5420413@0)
-
是一直在转还是第一开始转一下就卡住了?
-dynamite(慢慢找);
2009-7-15
(#5420829@0)
-
就有想转的声音,然后就没有了....
-xkfy0521(steven);
2009-7-15
(#5421603@0)
-
建议先检查齿轮、链条咬合的好不好。看齿轮要卸下后面的面板,在里面。如果没什么问题,增加一点拉力试试?一点一点增加,不要一下加很多。
-dynamite(慢慢找);
2009-7-16
(#5422752@0)
-
我家发生过类似问题, 结果发现是车库门下方的感应器被碰歪了, 掰正后就没问题了.
-chinaredtulip(chinaredtulip);
2009-7-15
(#5421578@0)
-
如果碰歪了,感应器的灯应该不会亮的吧,但灯会亮,说明没有碰歪...
-xkfy0521(steven);
2009-7-15
(#5421601@0)