This topic has been archived. It cannot be replied.
-
枫下家园 / 住房话题 /
tor
请教有关取暖的问题我家2楼3个卧室,有两个家暖气出风小,导致屋里温度低。初步看了一下,发现和另外那个卧室不是一个管道,暖炉上好像有4个管道通到不同的地方,有的管道出来的暖风大,有的管道出来的小。是什么原因呢?有什么解决办法吗?
另外,有什么公司可以上门检查处理呢?
谢谢!
-optel(hahaha);
2004-11-4
{251}
(#1964389@0)
-
Go to check if there is an adjustable door or valve inside for each 出风口. During I checked at my house, I found the adjustable doors inside after I took off the 出风口.
-oldp(oldp);
2004-11-4
(#1964473@0)
-
本人刚刚完成自家的AIR BALANCE工作.情况与你的一样,你到你的设备房检查出口管道的调节手柄,水平方向是全开的,竖向的是关闭的,你先全部关闭.然后开一个,到楼上检查出风口的风力大小.来回十几次.累死我了,不果完成任务,真的很开心.
-lmy(lmy);
2004-11-8
(#1970466@0)
-
NIU! hehe, but did in wrong way...
-elsa(青虫>";{!}{=);
2004-11-8
(#1970561@0)
-
Explain.
-rollor(Rollor);
2004-11-8
(#1970598@0)
-
in English? God you must kidding me. :-), don't worry, if you want to balance ur house, I can do it for ya.
-elsa(青虫>";{!}{=);
2004-11-8
(#1970669@0)
-
please explain in chinese
-guoluworker(锅炉工);
2004-11-8
(#1970674@0)
-
can't type it in office. hehe,
-elsa(青虫>";{!}{=);
2004-11-8
(#1970704@0)
-
bookmarked. wait to see your post in chinese. ^_^
-lusi(丑小鸭);
2004-11-8
(#1971002@0)
-
。。等你的中文版本。。
-zippo(O.M.G.);
2004-11-10
(#1974529@0)
-
别等了,我都不知道从哪里说好;D
-elsa(青虫>";{!}{=);
2004-11-10
(#1974601@0)
-
不厚道哈。 把大家等的脖子都变长了, 结果来这么一句。 飞无数砖头过去。
-ningxin0809(雁影行洲);
2004-11-10
(#1974602@0)
-
青虫子,我的方法是笨了点,你说错了吗?不知道错在哪里?请指教. 观察几天下来,效果还不错呀,每个房间温度差不多.23度呀. 突然想起"实践是检验真理的唯一标准",呵呵.
-lmy(lmy);
2004-11-9
(#1972863@0)
-
就是,等了几天了,青虫也不上来解释一下.
-yuer_xiao(小鱼儿);
2004-11-9
(#1973621@0)
-
如果现在调节手柄都是一个方向的,是不是就应该已经BALANCE了? 可是两个卧室还差将近5度啊. 而且有一部分热风管道根本就在一楼的吊顶里面,没找到什么地方可以进去查手柄开关的啊.
-yuer_xiao(小鱼儿);
2004-11-9
(#1973617@0)
-
小鱼儿,我说的调节手柄可能你理解不同.你到你的地库设备房,从炉子主管道一般分两路(大房子有三路以上)支管道,每个支管道有一个小手柄,10CM长,调节它就行了.我请教了EMBRIDGE的高手,实践证明效果不错.
-lmy(lmy);
2004-11-10
(#1974525@0)
-
都是同一水平方向不一定BALANCE,你要自己调节.我有一个是60度,可能与风管的长短有关系
-lmy(lmy);
2004-11-10
(#1974531@0)
-
我家的炉子好像没有调节手柄,我找了半天也没看到我家的炉子上工有5路管道,一路直接从炉子出来,很烫,另外4路通过一个大管道分出4个管道,用手触摸温度不一样。我也不是很懂,哪位可以帮忙?
-optel(hahaha);
2004-11-10
{133}
(#1974948@0)
-
有的DAMPER外面装了那个手饼,有的没装,那个螺丝上有个CUT,表示的是DUCT里面的DAMPER的位置,和DUCT平行就是全开,垂直就是关上,调好了就把外面的螺母给拧紧固定上
-elsa(青虫>";{!}{=);
2004-11-10
(#1974955@0)
-
check PM please
-optel(hahaha);
2004-11-10
(#1974958@0)