This topic has been archived. It cannot be replied.
-
枫下家园 / 住房话题 /
tor
请问:自己装GARAGE DOOR OPENER,房顶如何加固?我的房顶是
里面是FOAM,然后BUILDER作的天花板。发现OPENER还挺沉的,不知道这个天花板用不用处理一下,请有经验的朋友赐教?
-max2000(max);
2004-9-24
(#1901966@0)
-
先找到顶上的木头,然后将有孔的角铁用长点的大螺丝旋上去,下面就可以挂机器了。
-gates(远帆);
2004-9-25
(#1902309@0)
-
多谢远方,昨天忙一天,总算安装完毕.但是调试的时候,发现一个现象,马达常常因为过热而停止工作,等20分钟,恢复正常.但是我感觉门开关只有7,8次,不应该这么快就过热,请问原因何在?我从SEARS买的,CRAFTSMAN, 1/2 HP.谢谢.
-max2000(max);
2004-9-27
(#1905073@0)
-
可能是轨道没装正,门在轨道中运行时把劲(阻力大),造成电机过载。
-james0007(新兵);
2004-9-28
(#1907911@0)
-
Thanks. My motor is 10cm off the centerline since I was lazy to put a 2x4 above the door. That might cause some problem.
-max2000(max);
2004-9-29
(#1908619@0)