Off set the existing drain to the location wherever you want.
1: Raise the shower stall 3 to 4 inches higher then the basement floor.
2: build a wood frame at the location where the shower stall would be, be sure including the existing floor drain, make the wood frame same size as the bottom of the shower enclosure
3: Install one 90-degree elbow to the existing floor drain, the elbow now is ready for a straight pipe that can run horizontally.
4:Layout all pipe in the wood frame
5:Connect a straight pipe to the elbow and extend the stragiht pipe to the location where the shower would be. Then connect the "U" trap. After the "U" tarp installed. The pipe is now facing up. It is ready for the shower placement
6:After all pipe is done, fill up the raised floor with gravel stone and cement. Put the shower enclosure on top. DONE..
1: Raise the shower stall 3 to 4 inches higher then the basement floor.
2: build a wood frame at the location where the shower stall would be, be sure including the existing floor drain, make the wood frame same size as the bottom of the shower enclosure
3: Install one 90-degree elbow to the existing floor drain, the elbow now is ready for a straight pipe that can run horizontally.
4:Layout all pipe in the wood frame
5:Connect a straight pipe to the elbow and extend the stragiht pipe to the location where the shower would be. Then connect the "U" trap. After the "U" tarp installed. The pipe is now facing up. It is ready for the shower placement
6:After all pipe is done, fill up the raised floor with gravel stone and cement. Put the shower enclosure on top. DONE..