本文发表在 rolia.net 枫下论坛1.CIRCULAR DUAL LNB LNBF CB2008A FTA 118.7 DISH 119 118.8, It's designed especially for catching 119 & 118.7 (Anik F3) at the same time using one such LNB. Each Output gives signal from both satellites.
You will need to make sure you have Anik F3 118.7°W in your satellite list. If not you will need to added it and at least one of the TP like 11715 or Rename Echostar 9 121.0 W. You need special Circular 10750 LNB. Anik F3 will need a larger dish to get decent signal (30" +)
In The satellite List for Anik F3 118.7°W you will need the following settings:
• LNB Type: Standard
• LNB Freq.: 10750 MHz
set your switch setting to the special LNB aimed at 118.7/119
Scan the channels with Network On
You will get the Anik F3 channels (130 channels average)
Then go to EchoStar 7 119°W in your satellite list, use the same switch setting as 118.7°.above.
• LNB Type: Standard
• LNB Freq.: 10750 MHz
Scan the channels with Network On (260 channels average)
You are all set, getting the 2 satellites by only one single dish and LNB.更多精彩文章及讨论,请光临枫下论坛 rolia.net
You will need to make sure you have Anik F3 118.7°W in your satellite list. If not you will need to added it and at least one of the TP like 11715 or Rename Echostar 9 121.0 W. You need special Circular 10750 LNB. Anik F3 will need a larger dish to get decent signal (30" +)
In The satellite List for Anik F3 118.7°W you will need the following settings:
• LNB Type: Standard
• LNB Freq.: 10750 MHz
set your switch setting to the special LNB aimed at 118.7/119
Scan the channels with Network On
You will get the Anik F3 channels (130 channels average)
Then go to EchoStar 7 119°W in your satellite list, use the same switch setting as 118.7°.above.
• LNB Type: Standard
• LNB Freq.: 10750 MHz
Scan the channels with Network On (260 channels average)
You are all set, getting the 2 satellites by only one single dish and LNB.更多精彩文章及讨论,请光临枫下论坛 rolia.net